Showing 1–24 of 48 resultsSorted by latest
-
-
-
Raspberry Pi Pico is a new low-cost, high-performance microcontroller board with flexible digital interfaces. Microcontrollers are computers stripped back to their bare essentials. You don t use monitors or keyboards, but program them to take their input from, and send their output to the input/output pins. Using these programmable connections, you can light lights, make noises, send text to screens, and much more₵300.00
-
The AZDelivery 3M Cable DS18B20 Digital Temperature Sensor provides from 9-bit to 12-bit Celsius temperature measurements and features an alarm function with non-volatile, user-programmable high and low trigger points. The sensor does not require standBy power, meaning that when temperature data is not being read, the sensor consumes no electricity at all.₵40.00
-
This is a 3.3V/5V MB102 Breadboard Power Supply Module which provides a dual 5 V and 3.3 V power rails and has a multi-purpose female USB socket. The 3.3V/5V MB102 Breadboard Power Supply Module securely fits in a standard 400 or 800 tie points breadboard it also features reverse polarity protection, the module can take 6.5V to 12V input and can produce 3.3V and +5V. The module can also output 5V on USB connector or input through the USB connector. It’s a must-have product for experimenters those have to test/prototype electronic circuits on the breadboard.₵20.00
-
Here comes Maqueen – micro:bit educational programming robot platform Maqueen is an easy-to-use micro:bit programming robot for STEAM education, which inherits the playability and simple operation of micro:bit. With a mini body, play-and-play, it allows students to quickly learn graphical programming in an entertaining way while nurturing their interests in science and logical thinking. Suggest Age: 8 + Maqueen is accessible to Mind+ Programming platform now. Mind+ is a graphical programming platform from DFRobot, supporting python, Arduino and other programming platforms. At present, Mind+ has been applied to all kinds of sensors, modules and related educational products. micro: Maqueen (with micro:bit)₵800.00
-
Our AZ-Delivery relay modules switch quickly and reliably many switching operations. Thanks to an additional transistor, the module can be switched with most microcontrollers with little current. The relays used are generously dimensioned to allow permanent operation even under unfavorable operating conditions.₵80.00
-
₵100.00This SPI TFT display is a bright, anti-reflective display with a large 1.8 inch screen diagonal and integrated SD card reader.✔️ The TFT display has a card slot. Reading and writing is performed via the controller.✔️ High hardware compatibility with Raspberry Pi & Co. and other microcontrollers thanks to standard SPI data interface and freely available libraries for the ST7735 image controller. The controller is powered with 5V and the backlight with 3.3V.✔️ The contoller is operated with 5V and the backlight with 3.3V.
-
AZ-Delivery 3Watt speaker is used in various small electronics and DIY projectors and is very suitable for all kinds of sound source manufacturing.₵60.00
-
₵170.00The AZ-Delivery Dev Kit C was designed By Espressif to provide an easy introduction to programming the new ESP32 dual-core processor. With a variety of new sensors and functions, this board represents the next step in IoT development.
Special features
- As with the predecessor model ESP8266, the WLAN functionality is implemented directly in the SoC, but with additional Bluetooth function (incl. BLE).
- The ESP32 processor used combines a CPU with 2 Tensilica LX6 cores, clocked at up to 240 MHz, and 512 kiloBytes of SRAM in a single microcontroller chip.
- It also integrates a radio unit for WLAN (according to 802.11bgn) and Bluetooth (Classic and LE).
-
The AZ-Delivery Capacitive Soil Moisture Sensor Hygrometer Module V1.2 is the successor model of our soil moisture sensor module (hygrometer). Unlike the normal module, this sensor does not have an adjustable switching contact, it works analog and thus displays the exact moisture values in real time. Since the sensor works capacitively, this sensor does not contaminate the substrate even after a long period of use. This also results in a high durability.₵120.00
-
₵700.00The AZ-Delivery Starter Kit is a complete Arduino Starter Kit that includes:
- 35 in 1 Arduino accessory sensor kit
- Compendium book
- Microcontroller board with USB cable
- Breadboard
- Jumper set with 3 x 40 pieces
- E-book for easy entry into projects
The kit also includes:- 35 Arduino-compatible sensor modules
- MB-102 Breadboard Steckbrett with 830 contacts
- Jumper Wire Kabel 3 x 40 STK. je 20 cm
The kit can be purchased from Amazon.de.The Arduino Starter Kit is a good way to learn about Arduino, coding, and electronics. The kit includes the components needed to complete 15 projects. The kit also includes a guide book with step-by-step tutorials. -
Grove starter kit is designed for the Raspberry Pi Pico (not included). It includes 5 different sensors, 5 different actuators, 2 LEDs, 1 LCD display and 1 Grove shield. The kit will help you get started with the Raspberry Pi Pico quickly and comprehensively. Seeed has selected the most common sensors, actuators and displays in this kit, and you can connect all of these modules to the Pico simply by plugging and unplugging (no knowledge of wiring and circuits is required, which removes some of the scary stuff when you're just starting out with code and MicroPython). There are also detailed tutorials for each module (Micropython is currently supported). With the kit parts and tutorials, you can quickly learn how to turn on an LED light, control a motor, run a servo, read the values of various sensors, and even display them on the LCD display.₵900.00
-
Maker Hat Base extends out all the GPIOs of the Raspberry Pi 400 in a quick and simple way - be it using your favorite HAT or building your own simple circuit with jumper wires on the mini breadboard.₵200.00
-
Maker Pi Pico and Maker Pi Pico Base incorporate the most wanted Reset button for the Raspberry Pi Pico or Pico W and gives you access to all GPIO pins on two 20 ways pin-headers, with clear labels. Each GPIO is coupled with an LED indicator for convenient code testing and troubleshooting. The bottom layer of this board even comes with a comprehensive pinout diagram showing the function of each pin.₵250.00
-
Are you an educator looking for STEM products for your curriculum? Are you considering teaching Arduino in your classroom? Look no further, Maker UNO X is your right choice! Students can start coding right away, see the board lights up and plays a melody with the press of a button. No soldering required. Use Maker UNO X to introduce programming and electronics to your students!₵200.00
-
Maker UNO is fully compatible with Arduino. You can share the same library and code. We put in 12x LEDs, 1x piezo buzzer and 1x programmable button on the Maker UNO. We have removed the DC jack power input socket as most of the boards used in classes are powered using USB. We have also replaced the ATmega16u2 with CH340 to bring down the cost.₵200.00
-
The official Raspberry Pi micro HDMI to HDMI (A/M) cable designed for the Raspberry Pi 4 computer.Specification₵80.00
- 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
- 1m white cable
- Nickel-plated plugs
- 4Kp60 compliant
- RoHS compliant
- 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
-
₵100.00The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019. Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.
-
This 7? touchscreen display for Raspberry Pi lets you create interactive projects such as tablets, entertainment systems, and information dashboards. Raspberry Pi OS provides touchscreen drivers with support for ten-finger touch and an on-screen keyboard, giving you full functionality without the need to connect a keyboard or mouse. The 800 x 480 display connects to Raspberry Pi via an adapter board that handles power and signal conversion. Only two connections to your Raspberry Pi are required: power from the GPIO port, and a ribbon cable that connects to the DSI port on all Raspberry Pi computers except for the Raspberry Pi Zero line₵1,150.00
